|
Supervisor for Student project work (15 ECTS) TEP 4521 Sustainable Energy Systems, Specialization Project (Link) Totally 169 Project works (2004 to 2024) |
||
|
Semester |
Name | Title |
| F2024 | Monsen, Vemund | Intelligent operation and control of refrigeration and heat pumping system |
| F2024 | Vidvei, Nils Aasmund Simonsen |
Emission Testing on Operational Ships |
| F2024 | Heistad, Marie | Energy efficient low temperature freezing processes utilizing Stirling Machine |
| F2024 | Andersen, EIvind | Energy efficient Heat Pump system with zeotropic fluids |
| F2024 | Torvanger, Mina Andrea | Adsorption refrigeration systems in sunny areas |
| F2024 | Harsem, Ida Fredrikke | Adsorption refrigeration systems in sunny areas |
| F2024 | Lullau, Ulrik Kornelius | Solar-powered cold storage and microgrid integration for sustainable agriculture: a study for TRAX |
| F2024 | Eiring, Leander Drag | Solar-powered cold storage and microgrid integration for sustainable agriculture: a study for TRAX |
| S2024 | Martínez, Oriol Grau | Innovative Snow Storage Solutions for the Pyrenees Ski Resorts (BSc thesis, FENT2900, 20 ETCS) |
| S2024 | Kigen, Kristian Lossius Skogrand | Investigations of a Hybrid Renewable Energy System for an Off-Grid Residential Building |
| S2024 | Wurschmidt, Timothy Joshua | Investigations of a Hybrid Renewable Energy System for an Off-Grid Residential Building |
| ____________________________________________________________________________________ | ||
| F2023 | Boelsen, Thies Haakon | Theoretical and experimental Investigation on a combined absorption-compression heat pump with an ammonia-water mixture |
| F2023 | Kumarasamy, Sarawanakanth | Ultra-high temperature heat pumps with helium or hydrogen as working medium |
| F2023 | Kongshaug Aase, Anders | Integrated energy systems with high temperature heat pumps |
| F2023 | Sharma, Eshan Sunil Anju | Energy & Performance Efficient Design for Sugar Confectionery Drying Processing |
| F2023 | Riskild, Elias | Develop an off-grid refrigerator for rural Africa |
| F2023 | Ongstad, Ingvild Høilo | Develop an off-grid refrigerator for rural Africa |
| F2023 | Heiberg, Per Oscar Grov | Advanced energy solution in Single family house |
| F2023 | Sand, Victoria | Energy Efficient Heat Pump System in Industrial Application |
| F2023 | Risøy, Andreas | Clipfish Drying – Modelling Approach |
| ____________________________________________________________________________________ | ||
| F2022 | Jørs, Anders Grodås | Cold storage for an adsorption-based refrigeration cycle in Africa |
| F2022 | Aure, Ida Nilsen | Combined solar cells and wind power - An opportinity study |
| S2022 | Flohic, Baptiste | Optimization of defrost system for plate ice freezing machine |
| ____________________________________________________________________________________ | ||
| F2021 | Holnes, Elly d'Alcantara Fonseca | Effects of boil off reliquefaction in the fuel gas for engines in MEGI LNG carriers |
| F2021 | Skoglund, Sigurd | High temperature heat pumps in integrated energy systems |
| F2021 | Lang, Susanne | Indoor refrigeration system for snow production - design and optimization |
| ____________________________________________________________________________________ | ||
| F2020 | Hosseini, Seyedeh Fatemeth | High Temperature Heat Pump for Industrial Application |
| F2020 | Ophaug, Cathrine Hasz | Ground water heat pump in district heating and cooling systems |
| F2020 | Nilsen, Martin Andre Righetti | Industrial drying of aluminium production by-products and raw material |
| S2020 | Klevjer, Martin | Compressors in High Temperature Heat Pumps Systems |
| S2020 | Ryssdal, Signe | High Temperature Heat Pumps in Integrated Energy Systems |
| S2020 | Kasparitis, Darius | Hot water heat pump for circulation heating |
| ____________________________________________________________________________________ | ||
| F2019 | Hong, Jeonghee | Development and experimental activity for high efficient heat pump dryers |
| F2019 | Inthujan, Rasalingham | High temperature heat pumps in integrated energy systems |
| F2019 | Mellbye, Christian | Utilizing LNG Terminals for Low Temperature Freezing System for Tuna |
| F2019 | Pooya, Zehtab Jahedi | Energy Efficient Two Phase Vane Compressor Utilization Steam |
| F2019 | Tønsberg, Even Kristian | Numerical Investigation on the Major Components of Hybrid Absorption/Compression Heat Pumps at High Temperature Operation |
| F2019 | Undheim, Harald | Sustainable Snow Production, Storage and Snow Physics |
| _____________________________________________________________________________________ | ||
| F2018 | Prestvold, Kristoffer | Analyzing of a heat distribution central with focus on over dimensioning |
| F2018 | Vingelsgård, Erling | Design and simulation of sorption based solar ice maker |
| F2018 | Bredesen, Tom André | Design and simulation of a small cold storage with NH3 refrigeration system and CO2 as indirect cooling loop |
| F2018 | Espedalen, Benjamin H. | Conseptual study of a portable cooling system based on renewable energy for small fruit and vegetable vendors |
| F2018 | Våge, Edvard | Modeling a Borehole Thermal Energy System with Solar Collectors and Buffer Storage Tank for Space Heating |
| F2018 | Xiang, Menga | Snow Production Systems for Improved Energy Efficiency and Environmentally Friendly |
| F2018 | Lingaas, Simon Johan | Natural Working Fluid Mixtures – Heat Transfer and Pressure Drop in Small Heat Exchanger Pipes – Evaporation or |
| F2018 | Korstad, Liv Irene | High Temperature Heat Pump in Industrial Application |
| F2018 | Bjørvik, Fredrik | Hybrid Absorption/Compression high temperature Heat Pump |
| _____________________________________________________________________________________ | ||
| F2017 | Lin, Liguan | Integrated Supermarket Refrigeration for High Temperature Region (Northern China) |
| F2017 | Wan, Liangchen | Integrated Supermarket Refrigeration for High Temperature Region (Southern China) |
| F2017 | Aarekol, Jakob | Energy Optimization using Heat Pump in a Factory for Sweets (in Norwegian) |
| F2017 | Engh, Erling | Air as Working Fluid in Low Temperature Freezers for Fish |
| F2017 | Heimdal, Marianne | Energy Efficient and Environmentall Friendly Snow Production at Ambient Temperatures above 0oC |
| F2017 | Lin, Dong | CFD Simulation of Complex Ejextor System in Transcritical CO2 Systems |
| F2017 | Storslett, Espen | Experimental Investigation of a Heat Pump Assisted Drum Drying System using Propane (R290) as working Fluid |
| S2017 | Lindstøl, Sigurd | Investigation of Drying Kinetics of Seaweed and System Design for Seaweed Dryer (in Norwegian) |
| S2017 | Olafsen, Martin | Alternative solutions for heat central in the Gimse School, based on ground water as heat source |
| _____________________________________________________________________________________ | ||
| F2016 | Sharma, Kushal | Investigation of drying kinetics of seaweeds and system design for seaweed dryer |
| F2016 | Wersland, Maria Byrkjedal | Implementation of High Temperature Heat Pumps in Industrial Processes using Natural Working Fluids |
| F2016 | Skogheim Andersen, Anja Beate | Ground Water Based Heat Pumps - Utilization of Ground Water for heating and Cooling in Melhus Comunity - Centralized Solutions |
| F2016 | Saxvik, Olav Aarvaag | Energy Efficient Freezing System using CO2 as Working Fluids |
| F2016 | Bergwitz-Larsen, Kaja | Energy Efficient and Environmental Friendly Snow Production Equipment at Ambient Temperatures above 0oC |
| F2016 | Fernandez, Rosa Puentes | Design and Optimization of RSW Chilling System for Salmon Aquaculture |
| F2016 | Bijon, Nicolas | Investigation on Influencing Factors for the Efficient Drying of Sea Net Cages in Salmon Aquaculture |
| F2016 | Willing, Theresa | Investigation of Efficient Drying of Sea Net Cages for Salmon Aquaculture |
| F2016 | Jiang, Chengyang | Improved Energy Efficiency with Solar Panes in Combinations with Cooling / Heating System |
| F2016 | Zhou, Hongyun | Modelling of Ground Source System for Heat Pump Operations |
| _____________________________________________________________________________________ | ||
| F2015 | Chen, Song | Investigation of heat transfer and pressure drop in small pipes using propane |
| F2015 | Wang, Yuyuan | Experimental Investigation of a Heat Pump Assisted Drum Drying System Using Propane (R290) as Working Fluid |
| F2015 | Han, Yi | Energy Efficient Supermarket Refrigeration with Ejectors |
| F2015 | Thunes, Thomas Viking | Innovativ Optimation of Energy Consumption in Refrigeration Systems - Energy Efficient Refrigeration Systems |
| F2015 | Danielsen, Tobias | Development of Small Compact Heat Pump Dryer System for BioBank Materials |
| F2015 | Lillevåg, Stian | High Temperature Heat Pumps |
| F2015 | Dieseth, Jon-Brede Rykkje | Snow Production Equipment at Ambient Temperature Above 0oC |
| F2015 | Haver Vagle, Bernhard | Utilization of Surplus Heat from Snow Producing Machines |
| F2015 | Rossvoll, Petter | High Temperature Heat Pumps with Turbo Compressor |
| F2015 | Aarnes, Morten Akre | Cost Efficient Industrial Heat Recovery hrough Heat Pumps |
| F2015 | Jokiel, Michael | Development of a Dynamic Object-oriented Model for Turbo-Machinery, Applied on Mechanical Vapour Compression |
| F2015 | Danco, Simon | Salt diffusion and mass transfer in a 3D food structure |
| F2015 | Wetzel, Daniel | Experimental Analysis of the R744 Multi-Ejector Expansion Work Recovery Module |
| F2015 | Herdlitschhka, Timo | Energy Analysis of the Ejector Supported R744 Vapour Compression Refrigeration System at REMA1000 Prinsensgate and Rif. POLI in Spiazzo Rendena |
| S2015 | Lund, Robert Hoel | Energy and Cost Efficient Heat Recovery from Industrial Processes through Heat Pumps |
| S2015 | Hoff, Aksel |
Evaluation of Energy
Integrated Supermarkets Concepts |
| _____________________________________________________________________________________ | ||
| F2014 | Solberg, Erik Langaard | LNG Regasification System with Propane Intermediate Fluid Vaporizer |
| F2014 | Kjellsen, Per | Concept description of a Solar-Assisted Heat Pump (SAHP) with photovoltaics (PV) and phase change material (PCM) integrated in heat pump evaporator (e). |
| F2014 | Thue, Dan-Hermann | Simulation on falling film evaporation in coil-wound heat exchanger on LNG-FPSO |
| F2014 | Ytterhus, Mikkel | Analyse of change in design procedures of heat pump systems in nZEB |
| F2014 | Zhang, Jinrui | Theoretical and experimental analysis of different two-phase R744 ejector cycles |
| F2014 | Morshed, Monjur | Energy performance of ground coupled CO2 heat pump for buildings |
| F2014 | Kvalsvik, Karoline | Energy efficiency in thermal process industry |
| F2014 | Bertelsen, Synne Kathinka | Design and measurement of a CO2 refrigeration system with integrated propane subcooler at high air temperatures operations |
| F2014 | Haugsdal, Stine Børslid | Design and measurement of a CO2 refrigeration system with integrated propane subcooler at high air temperatures operations |
| S2014 | Jorschick, Holger | Measurement and Evaluation of Energy Integrated Supermarkets Concept |
| S2014 | Rudolph, Florian | Experimental Investigation of R744 Multi-ejectors for supermarket refrigeration systems |
| S2014 | Merz, Svenja | Experimental Investigation of Multi-Ejectors |
| S2014 | Bergland, Martin Glomsli |
Evaluation of a
hybrid compression-/absorption heat pump process at moderate to high
operation temperatures |
| _____________________________________________________________________________________ | ||
| F2013 | Zhao, Geping | Solar Driven Power Production Using R744 as Working Fluid |
| F2013 | Chen, Weiqing | Heat Transfer and Pressure Drop for New Natural Working Fluids |
| F2013 | Xiong, Jie | Use of Ejector to Increase the Energy Efficiency of Heat Pump and Refrigeration Systems |
| F2013 | Ye, Jingjing | R744 as Working Fluid in HVAC units for Apartments and Dwellings in Hot and Moderate Climate |
| F2013 | Knoph, Øyvind Lomeland |
Further
development of an energy efficient and environmentally friendly drum
dryer using a heat pump with CO2 as working fluid |
| F2013 | Haddal, Olav Martin |
CFD analysis of R744 Ejectors |
| F2013 | Borgås, Anders |
High temperature heat pumps
applying natural fluids |
| F2013 | Trædal, Stian |
Analysis of the Trilateral Flash Cycle for power production from
surplus heat |
| F2013 | Arnesen, Arild Nost |
Cooling solutions for the first Norwegian series of permanent magnet
machines |
| S2013 | Van de Ven, Adinda | Evaluation fo Advanced R744 System Configuration for Supermarkets |
| F2013 | Shundelmeier, Jens |
Experimental investigation of R744 compressor |
| F2013 |
Rosset, Claire |
Design of R744 Ejectors |
| F2013 | Raiser, Jasmin |
Convective drying and
sorption characteristics of curd meat cubes |
| S2013 | Nebot, Javier Olivas |
The design of the diffuser for a turbo-compressor working with CO2
as working fluid |
| S2013 | Heyse, Christoph |
Absorption heat pumping
systems for steam production and high temperature drying processes |
| S2013 |
Beuttel |
Test facility for supercooling analysis of secondary refrigerant
mixtures for the ice slurry production |
| _____________________________________________________________________________________ | ||
| F2012 | Klemsdal, Erik Junge | Energy Analysis and Environmental Impact of Current & New Supermarkets |
| F2012 | Jørgenrud, Siri | Evironmental Impacts of Current & New Supermarkets, an Energy analysis |
| F2012 | Clad, Lars | Cooling Systems for High Energy Efficient Electric Motors |
| F2012 | Berntsen, Malene Rustad | CO2 Heat Pump for Chilling of Ice Water / Heating of Hot Tap Water at 85oC |
| F2012 | Bjørneklett, Jonas | Ammonia Heat Pump in Single Family House for Space and Hot Tap Water Heating |
| F2012 | Johnsen, Arne Hogstad | The Future Supermarket |
| F2012 | Solemdal, Yngve |
CO2
Refrigeration
Systems
for Chilling
of Computer
and Telephone
Units |
| S2012 | Single, Johannes | Modification and Laboratory Testing of a Drum Dryer with a CO2 Heat Pump Solution |
| F2012 | Käfer, Timo | Heat and Mass Transfer in Micro Wave Assisted Drying of Stock Fish |
| F2012 | Damm, Martin | Case Study of EcoCute CO2 Heat Pump System in Low Energy Buildings |
| F2012 | Barba, Alberto Martinez | Ultra High Temperature Hybride Heat Pump for Industrial Applications |
| _____________________________________________________________________________________ | ||
| F2011 | Nerum, Lars Kristian |
Optimization of Heat Recovery and Heating of Supermarkets |
| F2011 | Brandsar. Jo |
Evaluation of Different Expander Technologies for Offshore Rankine Cycles |
| F2011 | Korff, Kristian |
Verification and measurements on a 45 bar ammonia heat pump |
| F2011 | Heggestad, Petter Haug |
Improved Heating Systems for Supermarkets |
| F2011 | Ingebrigtsen, Vegard | System Modeling and Energy Recovery in Fertilizer Production |
| F2011 | Li, Yashuo |
Design and analysis of efficient and integrated energy system for Nordic houses |
| F2011/S2012 | Hernandez, Jesus |
Energy and Environmental Analysis of Today's and Furure Supermakets |
| F2011 | Hanssler, Joachim | Heat and Mass Transfer in Ultrasonic Assisted Drying and Freezing |
| F2011 | Hennig, Jakob | Solar Cooling Devices |
| F2011 | Neef, Johanna | Heat Recovery in Refrigeration Systems Applying an Ejector |
| F2011 | Lehmann, Christian | Development of Life Cycle Climate Performance (LCCP) Tool Including Heating and Cooling of Passenger Compartment |
| F2011 | Rilling, Marcus | Survey on Expander/Generator Technologies for Compact Rancine Cycles |
| _____________________________________________________________________________________ | ||
| F2010 | Bolte, Franziska | Simulation of Turbo Compressors in a Dynamic System Model |
| F2010 | Hellriegel, Ulrich | Experimental Investigation of Different R744 Ejector Geometries |
| F2010 | Knoblauch, Tobias | Efficient Storage of Hot Water from R744 Heat Pump Water Heaters |
| F2010 | Mensch, Stefan | Complete MAC-LCCP Tool Including Heating and Cooling of Passenger Compartment |
| F2010 | Strizinger, Manuel | Investigation of Motive Nozzles for R744 Ejectors |
| F2010 | Elnan, Åsmund | Development of a New Heat Pump Cloth Drum Dryer with R744 as working Fluids |
| F2010 | Austebø, Bjørn | Heat pumping systems - Energy efficiency and optimizing of the refrigeration cycle |
| F2010 | Gilberg, Astrid Falch | Development of a CO2 RSW system onboard a fishing vessel |
| F2010 | Hundseth, Øystein | Heat recovery from freezing facilities using ejectors in the top compression stage |
| F2010 | Øygarden, Olav | Development of heat pump dryers in sunny areas |
| _____________________________________________________________________________________ | ||
| F2009 | Grüttner, Anton | Implementation of Ultrasound in Atmospheric Freeze Drying |
| F2009 | Blank , Sandra | Development of a CO2 heat Pump System for a Drum Dryer |
| F2009 | Schaaf, Jacob |
Development of new LCCP (Life Cycle Climate Performance) tool for MAC’s |
| F2009 | Humpfer, Frank |
Implementation of Multifunctional R744 Ejector test facility |
|
F2009 |
Fuder, Robert |
Implementation of Multifunctional R744 Ejector test facility |
| F2009 | Andreassen, Hanne Elisabeth | Reversible R744 (CO2) heat pumps applied in public transport |
| F2009 | Hagen, Tore | Heat Pumping System for Production of Ice Slurry with Focus on Heat Transfer |
| F2009 | Landøy, Per Agnar Sjøvold | Heat Pumping System for Chilling of Fish - Use of Impingement Freezer for Super Chilling |
| _____________________________________________________________________________________ | ||
|
F2008 |
Bakken, Marius |
Heat Pump Drying System as New Method for Conservation of Bio-bank Materials |
|
F2008 |
Gade, Henrik |
Development of energy efficient drying systems for the clip fish industry using heat pumps |
|
F2008 |
Rumpf, Ingrid |
Atmospheric freeze drying with heat pump – Enhanced techniques for reduced drying time at low temperatures |
|
F2008 |
Sætrang, Sondre |
RSW systems with CO2 as refrigerant – testing of new system solutions for seawater coolers |
| _____________________________________________________________________________________ | ||
|
F2007 |
Heizinger, Julia |
Atmospheric freeze drying with heat pump – Enhanced techniques for reduced drying time at low temperatures |
|
F2007 |
Pettersen, Erlend |
Combined Cooling, Heat and Power from LNG terminals |
|
F2007 |
Engebakken, Jon Arve |
Optimization of Energy Consumption in Freezing Tunnels - Modelling |
| _____________________________________________________________________________________ | ||
| F2006 | Alvestad, Ståle |
Optimale driftsforhold ved tørking av klippfisk i varmepumpetørker |
| ______________________________________________________________________________________ | ||
| F2005 | Fure, Håkon | Energieffektive RSW-anlegg med CO2 som kuldemedium |
|
F2005 |
Solheim, Ole Kristian |
Optimal energi- og effektbruk i næringsmiddelindustrien |
| F2005 | Sjøvold, Jannicke | Utvikling av ny metode for konservering av biobankmateriale |
| F2005 | Lien, Kjersti | Energibruk i ny industriell tørketeknologi |
|
______________________________________________________________________________________ |
||
| F2004 | Engh, Fredrik | Optimalisering av CO2 varmepumpe i kombinasjon med fluid bed tørke |
|
F2004 |
Vingelsgaard, Geir |
CO2 kuldeanlegg for RSW-anlegg på fiskefartøy |
|
F2004 |
Haugland, Magnus |
Calanus finmarchicus (raudåte) - konservering og prosessering |
|
______________________________________________________________________________________ |
||
|
F2003 |
Grande, Anett |
Kvalitetsegenskaper på tørkede fiskeprodukter - tørkebetingelsenes innflytelse |