|
Supervisor for Master Thesis (30 ECTS) TEP4906 Sustainable Energy System (Link) Totally 165 Master Thesis (2004 to 2026) (Semester: S-Spring, F-Fall) |
||
|
Semester |
Name |
Title |
| S2026 | Monsen, Vemund | Intelligent operation and control of refrigeration and heat pumping system |
| S2026 | Aas, Jonas Espe | Innovating cooling and heating - Enable savings and decrease the environmental footprint. |
| ________________________________________________________________________________________________________________________ | ||
| S2025 | Vidvei, Nils Aasmund Simonsen | Measurement and Analysis of Exhaust Gas Emissions from MS Borealis |
| S2025 | Heistad, Marie | Optimization of an Industrial Energy System with Thermal Energy Storage and High Temperature Heat Pump - A Case Study from a Pelagic Fishmeal Factory |
| S2025 | Andersen, EIvind | Design and Evaluation of Energy Systems with High-Temperature Heat Pumps Using Zeotropic Refrigerants for Heat Recovery in Spray Drying Processes |
| S2025 | Torvanger, Mina Andrea | Optimization of Adsorption Refrigeration Systems for Sustainable Cooling in Sunny Areas |
| S2025 | Harsem, Ida Fredrikke | Optimization of Adsorption Refrigeration Systems for Sustainable Cooling in Sunny Areas |
| S2025 | Lullau, Ulrik Kornelius | Techno-Economic Analysis of a Microgrid Integrated Solar-Powered Cold Storage System for TRAX Ghana |
| S2025 | Eiring, Leander Drag |
Techno-Economic Analysis of a Microgrid Integrated Solar-Powered Cold Storage System for TRAX Ghana |
| ________________________________________________________________________________________________________________________ | ||
| F2024 | Wurschmidt, Timothy Joshua | Development of an Optimized Battery Control Strategy Tool for Energy Management in Sustainable Buildings: A Solar-BESS and HVAC Integration Approach (Double Degree master with SJTU) |
| F2024 | Kigen, Kristian Lossius Skogrand | Design of hybrid renewable energy systems with atmospheric water harvesting for sustainable off-grid living (Double Degree master with SJTU) |
| F2024 | Risøy, Andreas | Modeling of a heat pump drying simulator for clipfish |
| S2024 | Muhogolo, Neema Wilfred | Development of Cold Storage unit for Adsorption Refrigeration System (co-supervisor) |
| S2024 | Boelsen, Thies Haakon | Theoretical and Experimental Investigation on a combined absorption-compression heat pump with an ammonia-water mixture |
| S2024 | Heiberg, Per Oscar Grov |
Advanced Energy Solution in single family house |
| S2024 | Kumarasamy, Sarawanakanth | Analysis of a Stirling Engine-Based High-Temperature Heat Pump Using Helium, Nitrogen, and Argon as Working Fluids |
| S2024 | Ongstad, Ingvild | Solar-based adsorption refrigeration systems for subzero cold storage |
| S2024 | Riskild, Elias Kolle | Solar-based adsorption refrigeration systems for subzero cold storage |
| S2024 | Sand, Victoria | Utilizing Zeotropic Mixtures in High- Temperature Heat Pumps for Efficient Spray Drying Processes |
| S2024 | Sharma, Eshan Sunil Anju | Energy & Performance Efficient Design for Sugar Confectionery Drying Processing |
| S2024 | Aase, Anders Kongshaug | High-Temperature Heat Pump Utilizing Zeotropic Refrigerants in an Integrated Energy System |
| ________________________________________________________________________________________________________________________ | ||
| F2023 | Volpato, Omar | Design of an Integrated Energy System using a Cascade High Temperature Heat Pump with Zeotropic Refrigerants |
| S2023 | Aure, Ida | Combined Solar Cells and Wind Power - An opportunity study |
| S2023 | Jørs, Andreas | Cold storage for an adsorption-based refrigeration cycle in Africa |
| S2023 | Danielsen, Adrian Peder Malum | Cold storage for an adsorption-based refrigeration cycle in Africa |
| ________________________________________________________________________________________________________________________ | ||
| S2022 | Fonseca Holness, Elly d'Alcantara | Effects of Boil off Reliquiefaction in the fuel gas for engines in MEGI LNG carriers |
| S2022 | Skoglund, Sigurd | High Temperature Heat Pumps in Integrated Energy Systems |
| ________________________________________________________________________________________________________________________ | ||
| S2021 | Ophaug, Cathrine Hasz | Ground water heat pump in district heating and cooling systems |
| S2021 | Nilsen, Martin Andre Righetti | Industrial Drying of Raw Materials and By-products in Aluminium Production |
| S2021 | Hong, Jeonghee | Design and analysis of CO2 transcritical heat pump for increasing of energy efficiency of Li-batteries production |
| S2021 | Gonzalez de Echavarri, Sofia Garaizar | Evaluation of energy system in an energy efficient commercial building |
| F2021 | Hosseini, Seyedeh Fatemeh | Experimental and theoretical analysis of high temperature cascade heat pump |
| F2021 | Pooya, Zehtab Jahedi | Energy efficient two-phase vane compressor utilizing steam as working fluid |
| ________________________________________________________________________________________________________________________ | ||
| S2020 | Bekken, Sondre | Utilizing LNG terminals for low temperature freezing systems for tuna |
| S2020 | Raveendrakumar, Rasalingham Inthujan | High temperature heat pump in integrated energy system with thermal sorage |
| F2020 | Klevjer, Martin | Compressor in high temperature heat pump systems |
| S2020 | Mellbye, Christian | Utilizing LNG terminals for low temperature freezing systems for tuna |
| F2020 | Ryssdal, Signe | High temperature heat pump in integrated energy systems |
| S2020 | Tønsberg, Even Kristian | Modelling approach for a liquid-injection NH3-H2O screw compressor |
| S2020 | Undheim, Harald | Snow economy and physics in snow production, storage and use |
| ________________________________________________________________________________________________________________________ | ||
| S2019 | Bredesen, Tom Andre | Design and simulation of a small cold storage with NH3 refrigeration system and CO2 as indirect cooling loop for storing of fresh fruits and vegetables |
| S2019 | Espedalen, Benjamin | Conceptual study of a portable cooling system based on renewable energy for use on fruit and vegetables |
| S2019 | Bjørvik, Fredrik | Design of a hybrid absorption/compression high temperature heat pump test rig |
| S2019 | Prestvold, Kristoffer | Analyse av varmeanlegg ved Sykehuset Østfold Kalnes |
| S2019 | Vingelsgård, Erling | Design and simulation of adsorption based solar ice maker |
| S2019 | Korstad, Liv Irene | Energy-efficient High Temperature Heat Pump Systems for a Spray-Dryer |
| S2019 | Xiang, Mengka | High Temperature Heat Pumps in Integrated Energy Systems |
| S2019 | Zhang, Zhanluo | Innovative Optimized Operation of CO2 Integrated Refrigeration and Heat Pump System |
| ________________________________________________________________________________________________________________________ | ||
| F2018 | Våge, Edvard | Borehole thermal energy storage with solar collectors and buffer storage for space heating of a neighbourhood in China |
| S2018 | Aarekol, Jakob | High Temperature Heat Pump for Reduced Energy Consumption in a Factory for Sweets (in Norwegian) |
| S2018 | Storslett, Espen | Experimental Investigation of a Heat Pump Assisted Drum Drying System using Propane (T290) as Working Fluid |
| S2018 | Lin, Dong | CFD Simulation of Complex Ejector System in Transcritical CO2 Systems |
| S2018 | Engh, Erling | Simulatios of a Freezing System for Pelagic Fish using Open Cycle with Air as Working Fluid |
| S2018 | Heimdal, Marianne | Climate Independent Snow Production and Solutions for Snow Storage |
| S2018 | Lindstøl, Sigurd Berger | Development of a Heat Pump System with a Ice Rink as one of the Energy Sourse for Heating of Nearby Buildings and Facilites (in Norwegian) |
| S2018 | Olafsen, Martin | Optimization and Process Improvements of a High Temperature Heat Pump Using Butane as Working Fluid |
| F2018 | Lin, Liguan | Integrated Supermarket Refrigeration for High Temperature Region (Northern China) |
| F2018 | Wan, Liangchen | Integrated Supermarket Refrigeration for High Ambient Temperature Region (Southern China) |
| ________________________________________________________________________________________________________________________ | ||
| F2017 | Jiang, Chengyang | Improved Energy Efficiency with Solar Panels in Combinations with Cooling / Heating System |
| F2017 | Zhou, Hongyun | Modelling of Ground Source Systems for Heat Pump Operations |
| F2017 | Saxvik, Olav Aarvaag | Energy Efficient Freezing system using CO2 as working fluid |
| S2017 | Wahl, Andreas | Energy efficient and high quality thawing of cod in large scale |
| S2017 | Skogheim Andersen, Anja Beate | Ground water based heat pumps – Adaptation for use of ground water for heating and cooling in Melhus center – centralized solutions |
| S2017 | Wersland, Maria Byrkjedal | Investigation of a hybrid compression absorption heat pump system for high temperatures |
| S2017 | Bergwitz-Larsen, Kaja | Energy Efficient and Environmental Friendly Snow Production by Refrigeration systems |
| ________________________________________________________________________________________________________________________ | ||
| F2016 | Chen, Song | Investigation of Heat Transfer and Pressure Drop in Small Pipes using Propane (R290) (LINK) |
| F2016 | Han, Yi | Energy-Efficient Supermarket CO2 Compressor Pack with Ejectors (LINK) |
| F2016 | Wang, Yuyuan | Experimental Investigation of a Heat Pump Assisted Drum Drying System Using Propane (R290) as Working Fluid (LINK) |
| S2016 | Aarnes, Morten Akre | Cost Efficient Industrial Heat Recovery through Heat Pumps (LINK) |
| S2016 | Danielsen, Tobias | Development of small compact heat pump dryer system for BioBank materials (LINK) |
| S2016 | Dieseth, Jon Brede | Snow Production equipment at Ambient Temperatures above 0oC (LINK) |
| S2016 | Rossvoll, Petter Olsen | High temperature heat pumps in dairy industry utilizing turbo compressor (LINK) |
| S2016 | Størdal Lund, Magnus | Energy Production with Solar Panels in Combination with Cooling/Heating Systems |
| S2016 | Thunes, Thomas Viking | Utvikling av system for duggpunktskjøling i forretningsbygg (LINK) |
| S2016 | Calleja, Elena Pastor | Development of a simulation model for combined Air Drying and Heat Pump Assisted Drying System for Clip Fish (LINK) |
| S2016 | Haver Vagle, Bernhard | Utilization of Surplus Heat from Snow Producing Machines (LINK) |
| ________________________________________________________________________________________________________________________ | ||
| F2015 | Lund, Robert | Optimized and Cost Efficient Industrial Heat Pumps based on Low Grade Waste Heat (LINK) |
| F2015 | Stradiotto, Gian Maria | Ground Source Heat Pump in District and Cooling System in Elverum (LINK) |
| F2015 | Zanfrisco, Luca | Combined Air Drying and Heat Pump Assisted Drying System for Clip Fish (LINK) |
| F2015 | Fava, Pierfrancesco | Efficient Heat Recovery from Industrial Processes through Heat Pumps (LINK) |
| F2015 | Solberg, Erik Langaard | LNG Regasification System with Propane Intermediate Fluid Vaporizer (LINK) |
| F2015 | Thue, Dan-Hermann | Simulation on falling film evaporation in coil-wound heat exchanger on LNG-FPSO (LINK) |
| F2015 | Kjellsen, Per | Concept description of a Solar-Assisted Heat Pump (SAHP) with photovoltaics (PV) and phase change material (PCM) integrated in heat pump evaporator(s) (LINK) |
| F2015 | Zhang, Jinrui | Theoretical and experimental analysis of different two-phase R744 ejector cycles (LINK) |
| F2015 | Olsen, Snorre | Thermal Energy Model for Indoor ice Rink (LINK) |
| S2015 | Clauss, John | Feasibility Study for Upgrading the Current heat Distribution Network of an Existing Building Complex to a Smart Thermal Grid (LINK) |
| S2015 | Glück, Jakob | Energy Integrated Supermarkets Concepts |
| S2015 | Haida, Michal | Experimental analysis of the R744 vapour compression rack equipped with the multi-ejector expansion work recovery module (LINK) |
| S2015 | Bertelsen, Synne Kathinka | Design and measurement of a CO2 refrigeration system with integrated propane subcooler at high air temperatures operations (LINK) |
| S2015 | Haugsdal, Stine Børslid | Design and measurement of a CO2 refrigeration system with integrated propane subcooler at high air temperatures operations (LINK) |
| S2015 | Morshed, Monjur | Investigation on CO2 ground-coupled heat pumping system with ejectors (LINK) |
| S2015 | Lalvos, Arturs | Optimization of a Small Ammonia Heat Pump with Accumulator Tank for Space and Hot Tap Water Heating (LINK) |
| S2015 | Edsbergløkken, Marie | Development of energy Systems in Swimming Pool Halls (LINK) (Closed for two years) |
| S2015 | Kvalsvik, Karoline Husevåg | Energy Efficient Drying Systems for the Dried Cured Meat Industry (LINK) |
| S2015 | Schumacher, Stefan Peter Erhard | Smart and cost efficient energy interactions in building complexes (LINK) |
| ________________________________________________________________________________________________________________________ | ||
| F2014 | Hoyas, Raul Calvo | Energy efficient Supermarket Refrigeration with Ejectors (LINK) |
| F2014 | Bergland, Martin Glosli | Optimizing the Compression/Absorption Heat Pump System at High Temperatures (LINK) |
| F2014 | Murer, Thomas Markus | Analysis of change in design procedures for heat pump systems in nZEB (LINK) |
| F2014 | Andresen, Hanne Thorshaug |
Study on the performance of central solar heating plants with
seasonal storage using underground soil in North China |
| F2014 | Mann, Jakob Aljoscha | Preliminary experimental investigation on a multi-stage cryogenic heat pipe heat exchanger (LINK) |
| S2014 | Arnesen, Arild Nøst |
Cooling solutions for the first Norwegian series of permanent magnet
machines |
| S2014 | Borgås, Anders |
Development of the hybrid compression-/absorption heat pump process
at high temperature operation |
| S2014 | Haddal, Olav Martin |
CFD and experimental analysis of R744 Ejectors |
| S2014 | Øyvind Lomeland Knoph |
Development of an energy efficient and environmentally friendly drum
dryer using a heat pump with CO2 as working fluid |
| S2014 | Erik Ro Rundhaug | Thermal Energy Recycling at Elkem Salten Verk (UiT) |
| S2014 | Stian Trædal |
Analysis of the Trilateral Flash Cycle for power production from
surplus heat |
| F2014 | Zhao, Geping | Solar Driven Power Production using CO2 as Working Fluid (LINK) |
| F2014 | Ye, Jingjing | Solar Assisted natural Working Fluids Heat Pump for Chinese Buildings (LINK) |
| F2014 | Xiong, Jie | Use of Ejectors to Increase the Energy Efficiency of Heat Pump and Refrigeration Systems (LINK) |
| F2014 | Chen, Weiqing | Heat Transfere and Pressure Drop for New natural Working Fluids (LINK) |
| S2014 | Brčić,Merisa | High Temperature Heat Pumps Applying Natural Fluids (LINK) |
| S2014 | Dobrić,Saša | Utilization Waste Heat from Metal Industry for Drying of Organic Waste (LINK) |
| S2014 | Gukelberger, Ephraim | Energy Efficiency Improvement of Industrial Refrigeration System within the Pelagic Fish Industry (LINK) |
| ________________________________________________________________________________________________________________________ | ||
| S2013 | Berntsen, Malene Rustad | Optimizing a CO2 Heat Pump for Chilling of Ice Water / Heating of Hot Tap Water at 85oCOptimizing a CO2Heat Pump for Chilling of Ice Water / Heating of Hot Tap Water at 85oC
|
| S2013 | Bjørneklett, Jonas | Optimizing a Small
Ammonia Heat Pump with Accumulator Tank for Space and Hot Tap Water
Heating |
| S2013 | Clad, Lars | Cooling System for
High Energy Efficient Electric Motors |
| S2013 | Erstad, Magnus |
Heat Pumps in
Rehabilitate
Heating Systems in Public Buildings to Replace Oil Boilers |
| S2013 | Glomlien, Gaute | High temperature heat
pumps for industrial applications |
| S2013 | Johnsen, Arne Hogstad |
Optimimal operation of energy system in a supermarket |
| S2013 | Klemsdal, Erik Junge | Minimization of energy consumption of new supermarkets |
| S2013 | Solemdal, Yngve |
CO2
refrigeration systems for chilling of computer and telephone units |
| ________________________________________________________________________________________________________________________ | ||
| F2012 | Li, Yashuo | Experimental optimization of energy efficient drum dryer with a CO2 heat pump system (LINK) |
| F2012 | Albert, Daniel | Design of Heat Recovery System in an Aluminium Cast House (LINK) |
| S2012 | Brandsar, Jo | Offshore Rankine Cycles (LINK) |
| S2012 | Heggestad, Petter Haug | Improved Heating Systems for Supermarkets (LINK) |
| S2012 | Ingebrigtsen, Vegard | Energy Analysis of Evaporator System in Fertilizer Production (LINK) |
| S2012 | Korff, Kristian | Optimization of a 45 bar Ammonia Heat Pump (LINK) |
| S2012 | Nerum, Lars Kristian | Heating and Heat Recovery of Supermarkets (LINK) |
| S2012 | Yu, Candice | Modeling the Heat of the Green Energy Lab in Shanghai by the Geothermal Heat Pump Combined with the Solar Thermal Energy and Ground Energy Storage (LINK) |
| S2012 | Pettersen, Sindre | Investigation on an Open Cycle Water Chiller Based on Desiccant Dehumidification (LINK) |
| S2012 | Palacz, Michal | CFD Analysis of R744 Ejectors (LINK) |
| S2012 | Foit, Wojciech | Paralell Operation of R744 Ejectors (LINK) |
| ________________________________________________________________________________________________________________________ | ||
| F2011 | Elnan, Åsmund |
Development of
New
Heat
Pump
Cloth
Drum
Dryer with CO2 as
Working
Fluid |
| F2011 | Vanjany, Erwan |
Design and
Optimization of
Heat
Recovery
System in a
Supermarket |
| S2011 | Austebø, Bjørn |
Feasibility
Study for
Establishing
a Super Chilled
Production
Line
in a
Slaughter
house |
| S2011 | Gilberg, Astrid Falch |
Development of a CO2
RSW System
Onboard
a Fishing
Vessel |
| S2011 | Hundseth, Øystein |
Heat Recovery in Refrigeration Systems with use of an Ejector System (LINK) |
| S2011 | Øygarden, Olav | Evaluation of Energy Efficient Drying Systems in Sunny Areas (LINK) |
| S2011 |
Jurkowski,
|
Experimental
Investigation of
Different R744 Ejector
Geometries |
| S2011 |
Bendkowski, Mateusz
|
Experimental
Investigation of
Novel R744 Ejectors |
| ________________________________________________________________________________________________________________________ | ||
| S 2010 | Adamowicz, Pawel | Experimental Investigation of Different CO2 Ejector Geometries |
| S 2010 | Kaluzny, Robert | Design of Plate Heat Exchangers for Heat Pump Water Heaters |
| S 2010 | Sochacki, Karol | Investigation of Motive Nozzles for CO2 Ejectors |
| S 2010 | Pfaff, Michael | Power production from low temperature heat sources (LINK) |
| S 2010 | Andreassen, Hanne Elisabeth | Air reversing CO2 heat pumps (LINK) |
|
S 2010 |
Hagen, Tore | Heat Pumping Systems for Production of Slurry with Focus on Heat Transfer (LINK) |
|
S 2010 |
Landøy, Per Agnar Sjøvold |
Heat Pumping Systems for Chilling of Fish – Use of Impingement Freezer for Super Chilling (LINK) |
| ________________________________________________________________________________________________________________________ | ||
| F 2009 | Heufken, Andreas |
Heat and Mass Transfer in Ammonia-Water Absorption Systems |
| F 2009 | Rumpf, Ingrid | Concepts for accumulation and transport of CO2 in solid/fluid state (CO2 ice slurry) |
| S 2009 |
Sætrang, Sondre |
RSW systems with CO2 as refrigerant - testing of new system solutions for sea water coolers (LINK) |
| S 2009 | Gade, Henrik | Development of effect and energy efficient drying systems for the clip fish industry using heat pumps (LINK) |
| ________________________________________________________________________________________________________________________ | ||
|
S 2008 |
Pettersen, Erlend | Utilizing of the exergy in LNG for refrigeration purpose (LINK) |
| S 2008 | Engebakken, Jon Arve | Optimization of Energy Consumption in Freezing Tunnels - Modelling (LINK) |
| ________________________________________________________________________________________________________________________ | ||
|
S 2007 |
Alvestad, Ståle | Optimal use of energy and consequences for the quality in clip fish dryers (LINK) |
| ________________________________________________________________________________________________________________________ | ||
|
S 2006 |
Fure, Håkon |
Calanus Finmarchicus (zooplancton) – pre-treatment and processing |
| S 2006 | Solheim, Ole Kristian |
Energy efficiency in fish processing plants |
| S 2006 | Sjøvold, Jannicke |
Ny lavtemperatur tørketeknikk som konserveringsmetode for biobankmaterialer |
| S 2006 | Nessler, Marie Volline |
Analyse av alternative løsninger for utnyttelse av naturgass i en kystkommune |
| ________________________________________________________________________________________________________________________ | ||
| S 2005 | Engh, Fredrik | Optimalisering av CO2 varmepumpe i kombinasjon med fluid bed tørke |
|
S 2005 |
Vingelsgaard, Geir |
CO2 kuldeanlegg for RSW-anlegg i laboratoriet |
|
S 2005 |
Haugland, Magnus |
Calanus finmarchicus (zooplancton) - conservation and processing |
|
S 2005 |
Rødsten, Marit |
Tørketekniske parametere ved atmosfærisk frysetørking |
|
S 2005 |
Eriksen, Elise Nordberg |
Termiske parametere ved atmosfærisk frysetørking |
|
________________________________________________________________________________________________________________________ |
||
| S 2004 |
Grande, Anett |
Kvalitetsegenskaper på tørkede fiskeprodukter - tørkebetingelsenes innflytelse |
|
S 2004 |
Drescher, Michael |
Analysis of freezing drum system to fix the fish filet on the rotating surface |